|
|
The 32 Watt EID-117F32 Total Primary 70 volt DCR is 26.9 Ohms 1,120T and has an exact center tap for modulator grid bias C- Secondary 8 ohm impedance DCR is 0.29 Ohms 64T and its suggested retail is $20 US
|
|
Key Features (117 Series):
Couple 3.2, 8 or 16 ohm speakers to 25 or 70 volt line outputs of amplifiers.
Up to 5 power tap levels available (except 117F2 which has 4).
Primary taps marked in watts (no calculation necessary), to match speaker power.
Frequency response 100 Hz. to 9 KHz. (1 db. reference @1 KHz.)
Insertion loss less than 2 db.
Distortion is less than 1.25% @ 100 Hz. at maximum power.
Horizontal, channel bracket, 2-hole (.187" dia.) mounting.
All models have solder lugs, also suitable for slip on jumper connections.
Total power requirements of speakers should not exceed the rated power of each transformer or rated power of the amplifier.
For speaker matching from older "classic" equipment check out our NEW 119DA matching transformer.
|
P# |
System Volts |
Power Rating Watts |
Audio Power Taps |
Voice Coil Impedance Ohms |
Mounting Centers |
Wt. Lbs. |
Dimensions (Inches) |
|||
|
A |
B |
C |
D |
|||||||
|
EID-117F2 |
70 |
2 |
2, 1, 1/2, 1/4 |
8 |
2.00 |
0.5 |
2.38 |
1.38 |
1.38 |
2 |
|
EID-117E4 |
70 |
4 |
4, 2, 1, 1/2, 1/4 |
3.2 |
2.38 |
0.6 |
2.81 |
1.5 |
1.69 |
2.38 |
|
EID-117F4 |
70 |
4 |
4, 2, 1, 1/2, 1/4 |
8 |
2.38 |
0.6 |
2.81 |
1.5 |
1.69 |
2.38 |
|
EID-117E8 |
70 |
8 |
8, 4, 2, 1, 1/2 |
3.2 |
2.81 |
0.9 |
3.25 |
1.75 |
2 |
2.81 |
|
EID-117F8 |
70 |
8 |
8, 4, 2, 1, 1/2 |
8 |
2.81 |
0.9 |
3.25 |
1.75 |
2 |
2.81 |
|
EID-117E16 |
70 |
16 |
16, 8, 4, 2, 1 |
3.2 |
2.38 |
1.5 |
3.69 |
2 |
2.31 |
3.13 |
|
EID-117F16 |
70 |
16 |
16, 8, 4, 2, 1 |
8 |
3.13 |
1.5 |
3.69 |
2 |
2.31 |
3.13 |
|
EID-117G16 |
70 |
16 |
16, 8, 4, 2, 1 |
16 |
3.13 |
1.5 |
3.69 |
2 |
2.31 |
3.13 |
|
EID-117F32 |
70 |
32 |
32, 16, 8, 4, 2 |
8 |
3.56 |
2.3 |
4.03 |
2.25 |
2.63 |
3.56 |
|
EID-117J4 |
25 |
4 |
4, 2, 1, 1/2, 1/4 |
3.2 |
2.38 |
0.6 |
2.81 |
1.5 |
1.69 |
2.38 |
|
EID-117K4 |
25 |
4 |
4, 2, 1, 1/2, 1/4 |
8 |
2.38 |
0.6 |
2.81 |
1.5 |
1.69 |
2.38 |
|
EID-117J8 |
25 |
8 |
8, 4, 2, 1, 1/2 |
3.2 |
2.81 |
0.6 |
3.25 |
1.75 |
2 |
2.81 |
|
EID-117K8 |
25 |
8 |
8, 4, 2, 1, 1/2 |
8 |
2.81 |
0.6 |
3.25 |
1.75 |
2 |
2.81 |
|
EID-117K16 |
25 |
16 |
16, 8, 4, 2, 1 |
8 |
3.13 |
1.5 |
3.69 |
2 |
2.31 |
3.13 |
|
EID-117K32 |
25 |
32 |
32, 16, 8, 4, 2 |
8 |
3.56 |
2.3 |
4.03 |
2.25 |
2.63 |
3.56 |
Mechanical & Schematic Data:
|
|
|
